Everything dealers ask before they decide.

Patented, fully demountable, about 1 tonne of galvanised steel. 11 triangular panels on 66 wheels; 4 motors turn a 5,000 kg vehicle. A worn part is replaced alone and it runs for decades. Our team installs it in about 2.5 hours; it dismantles in 40 minutes and the floor stays unmarked.

Fully galvanised steel — roughly 1 tonne per platform; the galvanising prevents corrosion. The car's weight is spread across a load-bearing ring — tapered-bearing hub, 8 arms, 8 inner and 8 outer arcs — and 66 wheels. Eleven triangular panels sit on that ring, each on 6 wheels. Load capacity is 5,000 kg.

Decades. That comes from a load-bearing frame of around 1 tonne of galvanised steel and a fully demountable design: any part that wears or fails is replaced on its own while the rest stays put; nothing is thrown away. We have built to this principle since 2014 — more than 800 platforms in 12 years.

Yes. From a small hatchback to a long-wheelbase limousine, from a heavy SUV to a light van: 5,000 kg load rating, Ø 4.3 m rotating disc, Ø 5.0 m with the ramps. 4 motors turn the vehicle silently, 8.5 cm above the floor. For motorcycles and ATVs we make a separate product, MotoPlat.

Yes. Car turntable, vehicle turntable, turntable for cars, rotating car platform and revolving car platform all name the same product: a motorised platform that turns a vehicle through 360° on the spot. YilPlat's sits on your existing floor, with no pit and no anchors.

A 6 × 6 m floor area is enough for any vehicle to turn freely. Leave at least 3 m between the hub centre and the wall. The rotating disc is Ø 4.3 m; with the ramps it measures Ø 5.0 m.

No. YilPlat sits on your existing floor — no pit, no anchor holes, no welding on site. The complete assembly is 8.5 cm tall, and once it comes off, the floor is exactly as it was.

Yes. Parquet, marble, granite, tile, epoxy, concrete: the platform sits on the floor you already have; no pit, no anchors, no welding, no renovation. The galvanised-steel frame of about 1 tonne spreads the load across 66 wheels, so the floor is never marked. All it needs is a level surface.

Our team installs it on site in about 2.5 hours, included in the UK price. The parts lock together: no welding, no anchors. You need a level area of about 6 × 6 m and a standard 13 A socket for the control panel.

Yes. It comes down completely in 40 minutes, goes back into its own crate and is rebuilt at the new branch in about 2.5 hours. Nothing was cut or anchored, so the old floor is left as it was. Ideal for leased showrooms, dealers moving premises and event venues.

£9,750 + VAT in our UK launch offer for the first 20 UK customers, delivered and installed by our team, with LED edge lighting, your logo and your colour included. Standard price: £10,750 + VAT ex-works, plus £1,250 delivery and £500 installation (£12,500 + VAT), so you save £2,750. Atelier is quoted on consultation.

Yes, in the UK launch offer: we deliver to your showroom and our team installs it in about 2.5 hours. At standard prices delivery is £1,250 and installation £500, on top of £10,750 + VAT ex-works.

Standard on every YilPlat: 4 × 24 V motors, an LCD control panel on a standard 13 A socket and 2 Bluetooth remotes with 8 m range. Bespoke adds your RAL/Pantone colour, your logo and LED edge lighting, all included in the UK price. Atelier is project-based: up to 8 m diameter, wood, leather or stone inlay, DMX lighting and a 3-year warranty.

Platforms with standard finishes ship within 20 working days of order confirmation. For a bespoke finish or colour we confirm the lead time with your quote.

Loosen the motor stops, move the wheels away from the panel wall, and the platform turns freely by hand. When the power returns, the motors go back to their position — nothing else is needed.

Buttons 3 and 4 on the remote nudge the platform right and left in small increments, so you can stop the framing exactly where you want it. Buttons 1 and 2 run continuous rotation. The Bluetooth range is 8 m, so you never have to leave the camera.

Do not drive wet vehicles onto the platform and keep the deck free of standing water — wet tyres skid on the ramps. It is made for indoor use: a showroom, a garage or an indoor car park, not a driveway, a garden or another open-air site.

Because YilPlat is fully demountable, a worn or faulty part — wheel, motor, remote, panel — comes out on its own, the replacement is shipped by courier and fitted; you never lift the platform.

Every platform carries a 2-year manufacturer's warranty; Atelier projects carry 3 years. Any part that wears or fails is replaced on its own, and our technical team answers your questions within one working day.

Eight arms bolt to a centre-bearing hub and form the ring; eleven triangular panels lock onto it, each running on six wheels. Four 24 V motors placed in a cross around the ring turn the disc; speed and direction are set from the control panel or the remote.

5,000 kg. The load is shared by 66 wheels, so SUVs, pick-ups and long limousines turn comfortably.

Yes — speed and direction are set on the LCD panel, and the remote nudges the car round in small steps.

Only a recessed turntable does: it sits in an excavated, reinforced-concrete pit. A surface-mounted turntable such as YilPlat sits on the floor you already have, 8.5 cm high, with short drive-on ramps and no excavation, anchors or welding. Our team installs it in about 2.5 hours, and it comes down in 40 minutes without marking the floor.

Yes. It touches nothing structural and is not permanent construction, so it counts as equipment rather than building work; when you move it comes down in 40 minutes and the floor is left as it was. If you rent, a word with the landlord is usually all that is needed.

In the UK it is £9,750 + VAT in our launch offer, delivered and installed by our team. The packages page sets out what is included; fill in the order form and we reply with a pro-forma within one working day.